CAD download
CAD drawing downloading page for idler rollers and mounting brackets, please choose from menu on left side.
Attention
Tube length on CAD data does not guarantee the availability of manufacturing.
Refer to the products page or catalog, and change your tube length to suit the available one if necessary.
Attention2
The way to save the downloaded file differs depending on the browser you use.
If your PC does not have a softwere to decompress, file may not show up.
CAD data is compressed as ZIP file.
Unit for each dimension on CAD data is metric (mm).
If you cannot download by any means, contact us from here.
3D CAD data is downloadable with STP file.
Specialized software is required to open STP file. Please click here.
Conveyor modules
：DXF 
：STP
Flat-Right Angle Transfer Module
| Model number | Dimensions | |||||
| F-RAT-NX75 | 6040 |
395mm(W) x 595mm(L) |
7540 |
395mm(W) x 745mm(L) |
9040 |
395mm(W) x 895mm(L) |
| 6050 |
495mm(W) x 595mm(L) |
7550 |
495mm(W) x 745mm(L) |
9050 |
495mm(W) x 895mm(L) |
|
| 6060 |
595mm(W) x 595mm(L) |
7560 |
595mm(W) x 745mm(L) |
9060 |
595mm(W) x 895mm(L) |
|
| 6070 |
695mm(W) x 595mm(L) |
7570 |
695mm(W) x 745mm(L) |
9070 |
695mm(W) x 895mm(L) |
|
| 6080 |
795mm(W) x 595mm(L) |
7580 |
795mm(W) x 745mm(L) |
9080 |
795mm(W) x 895mm(L) |
|
| Model number | Dimensions | ||
| F-RAT-S300 | Size A |
379mm(W)x 758mm(L) |
 |
| Size B |
497mm(W) x 758mm(L) |
|
|
| Size C |
597mm(W) x 758mm(L) |
|
|
| Size D |
697mm(W) x 758mm(L) |
|
|
Right Angle Transfer Module for handling heavy loads up to 250kg
| Model number | Dimensions | ||
| M-RAT | 6060 |
580mm(W)x 598mm(L) |
 |
| 7560 |
580mm(W) x 748mm(L) |
|
|
| 7570 |
700mm(W) x 748mm(L) |
|
|
| 7580 |
820mm(W) x 748mm(L) |
|
|
| M-RAT mounting stay | |
*Installation of the M-RAT unit requires the use of the dedicated stay.
Multi Angle Divert Module
| Model number | Dimensions | ||
| MABS | 400 |
398mm(W)x 186mm(L) |
|
| 500 |
498mm(W) x 186mm(L) |
|
|
| 600 |
598mm(W) x 186mm(L) |
|
|
| 700 |
698mm(W) x 186mm(L) |
|
|
| 800 |
798mm(W) x 186mm(L) |
|
|
30 /45 degree diverting module
| Model number | Divert direction | Divert left (L) | Divert right (R) | ||
| Divert angle |
30 degrees (30D) |
45 degrees (45D) |
30 degrees (30D) |
45 degrees (45D) |
|
| POP-D |
Size A |
394mm(W) x 760mm(L) |
394mm(W) x 760mm(L) |
394mm(W) x 760mm(L) |
394mm(W) x 760mm(L) |
| Size B |
494mm(W) x 760mm(L) |
494mm(W) x 760mm(L) |
494mm(W) x 760mm(L) |
494mm(W) x 760mm(L) |
|
| Size C |
594mm(W) x 760mm(L) |
594mm(W) x 760mm(L) |
594mm(W) x 760mm(L) |
594mm(W) x 760mm(L) |
|
| Size D |
694mm(W) x 760mm(L) |
694mm(W) x 760mm(L) |
694mm(W) x 760mm(L) |
694mm(W) x 760mm(L) |
|
Module to secure workers' moving lines among conveyor lines
| Model number | Transport surface height (H) | |
| SOG2 | H060 | |
| H070 | |
|
| H080 | |
|
| H090 | |
|
| H100 | |
|
*Refer to the dimension table in the CAD drawing for tranferable width (W).
Module supporting Fireproof compartment
| GAP roller | |
MDR: DC Power Moller
Brushless standard motor
| Roller diameter | Model number | Standard | Full face rubber lagging | Each-end rubber lagging | IP65 | IP55 | IP66 | V-belt pulley | V-ribbed pulley | 2 grooved tube | Crowned tube |
| Φ38 | PM380VS | |
|
- | |
|
- | |
|
- | - |
| Φ42.7 | PM427VS | |
|
- | |
|
- | |
- | - | - |
| Φ48.6 | PM486FE | |
|
|
|
|
- | |
|
|
- |
| Φ50 | PM500FE | |
|
|
|
|
- | |
|
|
- |
| Φ57 | PM570FE | |
|
|
|
|
- | |
|
|
- |
| Φ60.5 | PM605FE | |
|
|
|
|
- | |
|
- | |
Brsuhless high torque motor
| Roller diameter | Model number | Standard | Full face rubber lagging | Each-end rubber lagging | IP65 | IP55 | IP66 | V-belt pulley | V-ribbed pulley | 2 grooved tube | Crowned tube |
| Φ48.6 | PM486FP | |
|
|
- | - | - | |
- | |
- |
| Φ50 | PM500FP | |
|
|
- | - | - | |
- | |
- |
Motor driven rollers (MDR) with embedded controller
| Roller diameter | Model number | Standard | Full face rubber lagging | Each-end rubber lagging | IP65 | IP55 | IP66 | V-belt pulley | V-ribbed pulley | 2 grooved tube | Crowned tube |
| Φ48.6 | PM486XE PM486XP |
|
|
|
- | |
|
|
|
|
- |
| Φ50 | PM500XE PM500XP |
|
|
|
- | |
- | |
|
|
- |
| Φ57 | PM570XE PM570XP |
|
|
|
- | |
- | |
|
|
- |
| Φ60.5 | PM605XE PM605XP |
|
|
|
- | |
-- | |
|
- | - |
MDR for heavy duty pallet handling
| Roller diameter | Model number | Standard | Full face rubber lagging | Each-end rubber lagging | IP65 | IP55 | IP66 | V-belt pulley | V-ribbed pulley | 2 grooved tube | Crowned tube |
| Φ48.6 | PM570KT | |
- | - | - | - | - | - | - | - | - |
| Φ60.5 | PM605KT | |
- | - | - | - | - | - | |
- | - |
Tapered brushless standard motor
| Roller diameter | Model number | Standard | Full face rubber lagging | Each-end rubber lagging | IP65 | IP55 | IP66 | V-belt pulley | V-ribbed pulley | 2 grooved tube | Crowned tube |
| Φ42.7 | PMT42FE | |
- | - | - | - | - | - | - | - | - |
Blushless DC motorized pulley
| Roller diameter | Model number | Standard | Full face rubber lagging | Each-end rubber lagging | IP65 | IP55 | IP66 | V-belt pulley | V-ribbed pulley | 2 grooved tube | Crowned tube |
| Φ32 | PM320HS | |
- | - | - | - | - | - | - | - | - |